Installing Turn Signal Kit On Your UTV: Complete Guide

If you want to increase the versatility of your UTV, installing a turn signal kit is one of the best ways to do this without breaking the bank.

Many people opt to invest in a reliable UTV turn signal kit to make their vehicle road-ready and officially street-legal. However, the installation is tricky, so you need to understand the key steps to make it work.

Installing a turn signal kit on your UTV requires understanding how the machine works. You’ll need to remove the hood, seats, and panels to run the wire. After, you can drill holes for lights and replace the lighting system before finishing the wiring. Always test the lights before finishing.  

This guide will walk you through the steps to installing a turn signal kit on your UTV. It is important to know that before installing the turn signal kit, you must have an aftermarket headlight installed on your UTV. This is useful because it can make your vehicle street legal to allow you to drive on roads legally.

In this guide, you will be provided with step-by-step instructions on how to install a turn signal kit onto your UTV. We hope this guide will help make your UTV safer and more visible to other drivers.

‍Installing Turn Signal Kit On Your UTV: Complete Guide

Installing a turn signal kit on your UTV is a relatively easy process. However, there are some things to consider before you install the kit. The information below will give you the necessary steps to install a turn signal kit on your UTV and ensure it's done correctly.

The first thing to consider when getting ready to install a turn signal kit on your UTV is your type of kit. For example, many kits include turn signals, new tag lights, and taillights.

Each component is necessary to turn your UTV into a street-legal vehicle. They also increase vehicle safety and driving performance. Below we will tell you exactly how to make this installation step by step.

How To Install A Turn Signal Kit On Your UTV

Installing a turn signal kit on your UTV can be a tricky process. These steps below will walk you through the steps of installing a turn signal kit on your UTV.

The process of installing a turn signal kit is not difficult. But you might get stuck if you are not familiar with the process. You should have all tools available along with your turn signal kit on hand before getting started.

1. Remove Your UTV’s Hood

Many turn signal kits come with everything you need to make your UTV street legal, including front headlights and spotlights. If your kit includes these parts, you must remove the UTV hood to start.

In the front hood area, a harness typically holds all of the primary wirings for both your headlights and turn signal. Removing the hood gives you access to anything currently installed.

Try to avoid making a mess of any wiring or cables under the hood when doing this step. If you have no lights at all on your UTV, you likely have no wiring, but this will be the dedicated area where you store the wiring harness.

2. Remove All Seats

The seats inside the UTV also need to be removed because running the wire harness requires complete access to this interior. The seats typically snap into place or have a few bolts holding them down.

After locating these and removing the seats, we recommend looking below and seeing the current setup in your UTV. You also need to remember how they were positioned when you need to put everything back together.

It's also possible to just flip up the seats instead of removing them entirely, depending on the vehicle type. This is possible on many Polaris RZR models like the Pro XP.

3. Remove Trim Panels (Front & Rear)

After the seats and hood are out of the way, you can focus on the front and rear trim panels. Depending on your installation, you may only need to focus on the front for now.

Remove any screws or bolts that are holding the turn signal kit onto your UTV's frame and remove them from the frame of your UTV. When taking the panels off, local the wire harness again to ensure it's out of the way.

One of the most common mistakes when removing these panels is getting them caught on the wiring and ripping or tearing something. This leads to a whole new issue, creating more work for yourself.

4. Run And Connect The Wire Harness

Now it's time to run and connect the wire harness. This is clearly the most tricky part of the entire installation, especially if you have little to no experience handling anything like this before in the past.

You’ll need to slowly and carefully guide the harness from the front of the UTV to the back through the open area you have created. Don’t let the wire sit in any heat spot areas of the UTV.

This is critical because in the future faulty wires can become an issue. After running it through the machine, you can also run tests on the wiring to ensure it is working properly.

5. Drill Holes For Lights

Once the wires are in place, you can begin focusing on the lights and where they will go. If necessary, this includes where you will place the blinkers, tail lights, and headlights.

Start by measuring the areas and marking where you desire each item to go. Make notes on the machine so when you go to drill holes for these lights, they are accurate and in the right place for wire connections.

You can measure the front and rear fenders for the headlights and taillights. Once this is done, more to the dash space and tag location for your blinkers.

After you finish marking, start drilling slowly in each location. Depending on the machine, you can expect the plastic to be tough to drill because these machines are built with heavy-duty materials.

We recommend using a 3/4 inch drill bit but check with your turn signal kit to be sure this size works.

6. Replace The Lighting System

Next, you can remove any old lights that are getting replaced if you haven't already. If you have no plans to move the lights, you may not need to drill in each spot because some are already done.

All your lights should flush in the proper area with a tight fit. Remember, these vehicles ride off-road on rugged terrain, so they should be tight enough to stay in place during some rough riding experiences.

You can move to the dash area to focus on the turn signal next. Depending on the kit, this can also include a full dash replacement for your speedometer and fuel meters.

7. Finish Wiring The New Lights & Signals

Connect all of the wires to make sure they are going to connect properly with each other, then put them back into their respective places on your UTV's frame or body where they belong, depending on which

Each kit will have specific instructions indicating which wire color should connect to what. There is no blanket or general instruction for this step, but many of the recommended kits use orange and white wires.

Remember that each connection you make must be firm with no loose wires, or they will disconnect after driving over a few bumps. Then you are forced to take apart the vehicle again just to tighten a few wires.

Depending on the kit, you could have anywhere between four to twelve lights to connect. Each connection should be made with precision and focus.

8. Try Testing The New Install

When you are installing a UTV turn signal kit, the last thing you want to do is put the vehicle back together and find out that something went wrong.

The best way to avoid this problem is to test everything before putting the vehicle back together. This includes testing your wirings and ensuring that your turn signals work properly.

This includes flicking the lights on and off, honking the horn, and turning the vehicle. This allows you if the dash powers on properly and everything is running smoothly.

9. Put Panels And Seats Back Together

You should also make sure to put all of these parts back into their original place so that if there is any issue with them later on, it won't be hard to find them.

This will ensure that you get a smooth ride and that you can use your new turn signals in the future. We recommended taking notes about everything you took apart, so this step goes by quickly too.

What To Look For In A UTV Turn Signal Kit

When buying a UTV turn signal kit, it’s important to ensure you have the right one for your vehicle type. Many different brands offer various types of turn signals, and they come with different features.

A UTV turn signal kit is a great way to upgrade your UTV. It will make it easier for you to spot other drivers and communicate with them during the ride. However, there are some factors you should consider when looking for this type of product.

Installation Method

The easier the installation, the better for a UTV turn signal kit. Many will require a similar installation process, but depending on the equipment type, you might have an easier time installing certain kits.

For example, a kit with advanced headlights or a horn is a much more complex installation than only installing a smaller turn signal. However, we will help you install a complete kit in this guide.

Accessories

When looking for a potential turn signal kit choice for your UTV, consider how many accessories it comes with and what you need. For example, there are cheap options that simply include a turn signal and some wires.

However, you need much more to legalize your vehicle for street driving. Other kits are more advanced with a horn, headlights, taillights, and more. Choose the type of kit based on the accessories you need.

Durability

Next, you’ll want to think about durability whenever you purchase any type of equipment for a UTV and the type of driving you typically do. Focusing on a kit with a high waterproof rating is smart if you live in a colder region with lots of snow.

Most kits are designed with similar materials, and the installation is critical to ensure you get the most durability from your turn signal kit.

Compatibility

Lastly, you need to consider sizing and what vehicles a specific turn signal kit is compatible with before buying anything. This is why we list some options based on popular UTV vehicle types below.

You will also notice tons of universal kits can fit nearly every UTV type. Without the proper compatibility, you won’t be able to properly install the kit to take advantage of all the features and benefits.

5 Best Turn Signal Kits For UTVs

Once you understand the basics of installing a turn signal kit on your UTV, you can look for the best products. It is necessary to find one that is compatible with your ATV type, and below we include options that match some of the most popular UTVs like Polaris and Can-Am.

You can also identify why you are getting a turn signal and what the local laws are in your state. For example, the proper turn signal kit could make your UTV street legal.

The law states that you must have a headlight, tail light, and turn signals on your UTV when driving on the street. You are not street legal if you don't have these three items.

So with that in mind, you can consider one of these five turn signal kits for UTVs below.

MCS Adventures Turn Signal Kit - Best Overall Turn Signal Kit For UTVs

The MCS Adventures Turn Signal Kit is a high-quality turn signal kit for UTVs. It has all the essential features for a turn signal kit, including round LED lights, easy installation, and durability.

This kit comes with everything needed to install it on your vehicle and has an adjustable mounting system that will fit most models of UTVs. It also provides excellent visibility and safety while giving riders an extra sense of security when they're in their vehicle.

The heavy-duty lever switch comes with a 4-way flasher and horn included too. This means you can turn your UTV into a street-legal vehicle with everything included in this kit.

The installation requires only connecting two wires with a 12 Volt ignition source and chassis ground. You must also drill a 3/4" hole to fit the lights snugly.

It also comes with other parts like:

• 4 Turn Signal Led Lights
• 2 Clear LED Lights
• 2 Green Panel Mounting indicators
• Horn & Mounting Bracket
• Flasher Relay

XTC Power Products Turn Signal Kit - Best Turn Signal Kit For Can-Am

The XTC Power Products Turn Signal Kit is the best turn signal kit for Can-AM UTVs. It is made of durable materials in the USD and is considered one of the easiest kits to install for someone without experience.

It comes with a self-canceling turn signal system equipped with .75" LED Blinker Lights. It also plugs into an OEM brake light harness, so it's much faster to install and compatible with many Can-Am models.

The rocker switch comes with two .75" 3 LED front Amber Lights for extra visibility at night or in less forgiving conditions. This kit also comes with other essentials like an automatic turn signal system and horn.

The laser etched turn switch is one of the most advanced features for this price point, and the emergency hazard switch is essential too. This kit is built to run just like any turn signal kit for a traditional car would work.

We highly recommend this kit to any Can-Am riders looking to make their UTV street legal for on-road use.

SuperATV Turn Signal Kit - Best Turn Signal Kit For Polaris

The SuperATV Turn Signal Kit is a reliable and easy-to-use product that makes your Polaris UTV safer and more convenient. You have an option for a few different kits depending on the investment you want to make.

Polaris UTV owners should consider investing in the SuperATV Turn Signal Kit if they want to improve their visibility and have a lot of features at their disposal.

It has everything you need for installation, including the turn signal light, wiring harnesses, mounting brackets, screws, and even detailed instructions. The kit also includes two LED bulbs for the front turn signals.

Most of the items included in this kit are graded as plug-and-play, so installation is as fast as possible. It works on some of the most popular Polaris models, like the Polaris RZR 900, with a 100% fitment guarantee.

This kit also includes a compact horn, and all light wires are color-coded, so hooking it up isn't complicated. You can expect bright turn signals with extra road visibility, so your UTV passes all road tests.

MiKaFex Universal Turn Signal Kit - Best Budget UTV Turn Signal Kit

The MiKaFex Universal Turn Signal Kit is a budget turn signal kit for UTVs. The kit contains everything you need to install it on your UTV, including the wiring harness and the hardware needed to mount it.

It comes with a wire harness that can be installed in minutes and is compatible with most vehicles. This makes this kit the best budget option for those who are looking for an affordable turn signal solution.

The kit has a universal design that can be installed on almost all vehicles and doesn't require drilling or modification of your vehicle's chassis. The kit also includes an installation guide and a user manual, so it's easy to install.

Items included are a loud horn and essential turn signal items, so if you require any headlights or taillights, this isn't the right option for you.

The design is extra durable using high-quality ABS materials, and the amber light is extremely bright for plenty of road visibility. It also comes with a lifetime warranty, so you can be sure this is a solid investment with an unlimited lifespan.

Kemimoto Universal Turn Signal Kit - Best Universal UTV Turn Signal Kit

The Kemimoto Universal Turn Signal Kit is the best universal fitting turn signal kit known to work with some of the most popular UTV models.

This kit has many features that make it one of the best turn signal kits for UTVs. The kit includes a horn and four total turn signal lights, including all the required wiring.

It also includes brake lights with red, amber, or clear lenses. The kit also includes an emergency flasher that can be used in emergencies, like when you need to warn other drivers of your presence on the road.

This universal fitting turn signal kit is one of the best because it has all these features at an affordable price point, making this an excellent buy for anyone who wants to get their hands on an inexpensive kit.

The horn is black and extremely loud, and all items included in this kit come with a 12-month warranty. The amber light is also extremely bright and reliable so you can feel safe on the road with this kit.

Does A Turn Signal Kit Make Your UTV Street Legal?

A turn signal kit is a reliable addition to your UTV that makes it street legal, but it depends on the type of kit you use. The street laws vary based on the state you are riding in too.

Most states require that you have at least a turn signal kit, horn, mirrors, headlights, and taillights. Many of the kits mentioned above include all the critical light components to fulfill this requirement.  

This is a must-have accessory for your UTV. Without one, you risk getting into trouble driving on paved roads if you have not correctly legalized your vehicle for street activity.